Materials needed

For this module, you'll need:

• The Student Notebook for this module (SA01).
• The following pieces from your kit:

• The stand base from your kit. This could either be the box itself (for kits with the stand base integrated into the box) or a standalone 3D printed piece:

• The following 3D printed pieces from your kit (you don't need to get them all out yet):

• The left and right branchial arches from your kit. If the branchial arches are not yet cut out, follow the instructions on the sheet to fold and cut them out.

• "Office" scissors for cutting out the branchial arches (if not already cut out)

Each of the 3D printed pieces in your kit has small hooks and pegs with raised letters on them. You'll use these in other modules to attach muscles (rubber bands) and ligaments (ribbons) but in this module they'll just help you to identify the pieces. These raised letters may be white or black in the images for easier visibility but they are the same color as the piece on the actual 3D printed pieces.